Description
What’s New?
- 16ga Powder Coated Motor Shroud – For ultimate protection of the motor and furthering reducing risk of water/spray reaching the motor
- 5′ Auto-Off Hose & Valve Kit – Allowing total control of your Crap Shooter HD3 with the flip of a valve and with the added benefit of being up to 5′ away from the HD3 jetter
- Improved Port Placement – The Heavy Duty case does most of the work to protect your Crap Shooter pump/motor but with the external ports, there was still a risk of pump damage from dropping/banging the case and hitting a port directly. Now the low pressure inlet is recessed into the case for ultimate protection and the high pressure out is fully contained within the case
- ZeRust Chemical Inhibitor – Each Crap Shooter HD will not come standard with a ZeRust Vapor Capsule. The Vapor Capsule looks like a piece of gray foam but will off-gas over time creating a chemical shield within the Crap Shooter HD case. Rust and corrosion is difficult to avoid in a closed case with consistently wet material however the ZeRust Vapor Capsule will mitigate the chance of rust and corrosion internally
The heart of our Crap Shooter HD2 is an ARNA Triaxial Pump. ARNA is renowned worldwide for their pump selection. The Triaxial Pump is what allows us to maintain lower assembly weights and have the added benefit of nearly no maintenance required.
With a max draw of 13 amps, you’ll have no issue with residential service calls as a common 20 amp circuit will allow the Crap Shooter HD2 to safely operate up to the max amperage draw without tripping circuits. Safety is a core value which is why we also include a power supply cord with integrated GFCI.
Everything you need for the first service call is included in our standard Crap Shooter HD2 case. On the pressure side, you’ll have a 75′ x 1/8″ jetting hose along with our standard two nozzle kit. On the supply side, you have a 25′ expandable water hose with ball valve compatible with any common water spigot. We include a steel braided adapter line compatible with common 3/8″ fixture supply valves which also has an integrated quick connect adapter to easily attach to the Crap Shooter HD2.
The Crap Shooter HD2 is suited best on pipe up to 3″.
Features:
- 2000psi / 1.7GPM Power Unit
- Draws 13amps on 110v circuit
- 35′ power cord with GFCI plug
- 2 Jetter Nozzles (Flusher & Thruster)
- 3/8″ Fixture Supply Valve Adapter Line w/ Quick Connect
- 75′ x 1/8″ High Pressure Jetting Hose
- 25′ Expanding supply hose
- 16oz Pump Saver Solution
- 19″ x 16″ x 9″ footprint totaling 1.2 sq ft (standing on back)
- Full case weighs 32 lbs
- 1 Year Warranty
*Pump, fixtures and hoses rated for up to 120°
